巴陵石化熱塑性橡膠SEBS YH-507、507H
YH-507 通過添加增粘樹脂和加工油等助劑可制備自粘保護膜用專用料。專用料作為雙層或多層共擠薄膜（多為PE膜）中的膠粘層。SEBS／PE 自粘保護膜主要應用在以下行業：（1）五金行業。如鋁板、不銹鋼板、塑鋼板、玻璃板等。（2）電子行業。如液晶顯示器、手機屏幕、空調及各種家用電器表面等。（3）建材行業。如天花板、人造大理石、瓷磚等。其目的是防止受保護基材表面在運送、裝配或加工過程中受到損害或污染。
?
YH-507、507H 性能指標和應用
項目名稱 典型值（但不限制）
結構 ：線型
苯乙烯含量 %： 15
揮發份，%? ≤ ：1.0
300% 定伸強度，MPa?≥： 1.2、1.0
拉伸強度，MPa?≥： 8.0
伸長率，%? ≥：706、800
硬度，邵 A ：55、54
MFR,g/10min(5Kg,200℃ ) ：3.8、0.8-1.2
應用領域 制備自粘保護膜
?
?
Baling Petrochemical thermoplastic rubber SEBS yh-507, 507h
Yh-507 special material for self-adhesive protective film can be prepared by adding additives such as tackifying resin and processing oil. Special material is used as adhesive layer in double-layer or multi-layer coextrusion film (mostly PE film). SEBS / PE self-adhesive protective film is mainly used in the following industries: (1) hardware industry. Such as aluminum plate, stainless steel plate, plastic steel plate, glass plate, etc. (2) Electronics industry. Such as liquid crystal display, mobile phone screen, air conditioner and various household appliance surfaces. (3) Building materials industry. Such as ceiling, artificial marble, ceramic tile, etc. The purpose is to prevent the surface of the protected substrate from being damaged or contaminated during transportation, assembly or processing.
?
Yh-507, 507h performance index and Application
Project name typical value (but not limited)
Structural： Linetype
Styrene content%: 15
Volatile matter,% ? ≤: 1.0
300% constant tensile strength, MPA ? ≥: 1.2, 1.0
Tensile strength, MPA ? ≥: 8.0
Elongation,% ? ≥: 706, 800
Hardness, Shao A: 55, 54
MFR,g/10min(5Kg,200℃ ) ：3.8、0.8-1.2
Application field preparation of self-adhesive protective film | 
